Análisis de falla en herramientas manuales agrietadas
dc.contributor.advisor | Cendales Ladino, Edwin Darío | |
dc.contributor.author | Camargo Capador, Johnatan Camilo | |
dc.contributor.author | Reyes Bejarano, Elkin Rodrigo | |
dc.contributor.author | Rivera Aranda, Carlos Andrés | |
dc.date.accessioned | 2018-09-04T16:18:22Z | |
dc.date.available | 2018-09-04T16:18:22Z | |
dc.date.created | 2018-06-15 | |
dc.description | El objeto de la presente investigación es determinar los factores que indujeron fallas mecánicas a dos componentes mecánicos; usadas como herramientas de la industria las cuales son una copa 14 mm y un extensor 120 mm. En primer lugar, se realizó´ una investigación de los fundamentos teóricos; corrosión bajo esfuerzo, y fatiga, que ayudaron a comprender más a fondo cual pudo haber sido la causa principal para que las piezas se vieran afectadas a estas determinadas fracturas. Luego se llevó a cabo la descripción de cada uno de los componentes afectado, y además de sus respectivas fallas producidas en cada una de las piezas. Luego se llevó a cabo las respectivas observaciones metalográficas de los componentes, así mismo también se practicaron ensayos de dureza. Para finalizar se estableció´ que la copa se fracturo de manera frágil debido a la corrosión bajo esfuerzo, el extensor fallo por nucleación de fatiga.(Apartes del texto) | spa |
dc.description.abstract | The object of the present investigation is to determine the factors that induced mechanical failures to two mechanical components, used as tools of the industry which are a 14 mm socket wrench and a 120 mm bar tool extension. In the first place, an investigation of the theoretical foundations was carried out; corrosion under stress, and fatigue, which helped to understand more thoroughly what could have been the main cause for the pieces to be affected to these determined fractures. Then the description of each of the affected components was carried out, and in addition to their respective faults produced in each of the pieces. Then the respective metallographic observations of the components were carried out, likewise hardness tests were also carried out. Finally, it was established that the socket wrench fractured in a fragile manner due to stress corrosion cracking, the extensor failure by nucleation of fatigue. (Parts of the text) | spa |
dc.identifier.uri | http://hdl.handle.net/11371/1718 | |
dc.language.iso | spa | spa |
dc.rights.acceso | Abierto (Texto Completo) | spa |
dc.rights.accessrights | info:eu-repo/semantics/openAccess | spa |
dc.subject.lemb | Metales - Corrosión con esfuerzo | spa |
dc.subject.lemb | Fatiga de metales | spa |
dc.subject.lemb | Resistencia de materiales | spa |
dc.subject.lemb | Fractura de metales | spa |
dc.subject.lemb | Ingeniería mecánica | spa |
dc.subject.lemb | Esfuerzos y deformaciones | spa |
dc.subject.lemb | Microestructura | spa |
dc.subject.lemb | Fractografía | spa |
dc.subject.lemb | Ensayo de dureza | spa |
dc.subject.proposal | Corrosión | spa |
dc.subject.proposal | Esfuerzo | spa |
dc.subject.proposal | Fatiga | spa |
dc.subject.proposal | Fractura | spa |
dc.subject.proposal | Herramientas | spa |
dc.subject.proposal | Extensor | spa |
dc.subject.proposal | Copa | spa |
dc.subject.subjectenglish | Corrosion | spa |
dc.subject.subjectenglish | Stress | spa |
dc.subject.subjectenglish | Fatigue | spa |
dc.subject.subjectenglish | Fracture | spa |
dc.subject.subjectenglish | Tools | spa |
dc.subject.subjectenglish | Bar tool extension | spa |
dc.subject.subjectenglish | Socket wrench | spa |
dc.title | Análisis de falla en herramientas manuales agrietadas | spa |
dc.type | info:eu-repo/semantics/bachelorThesis | spa |